Konstrukt™ Lunar Series: Koastal

Konstrukt™ Lunar Series: Koastal

DESCRIPTION: Lunar Series

From afar, the moon gleams exquisitely at sundown. It envelopes the night with mysterious aura, silently luring a curious spectator in. Its lulling presence pacifies the hardness of the day. Utterly hypnotizing, one experiences a sense of calm and completeness. Dazed eyes can’t simply look away from it. Further zoom into its surface, it boasts varying textures – tiny and large craters, dark stretches, and rough impacts. Bombarded with asteroids and meteorites colliding with the lunar surface, it comes out beautifully undone. The moon is perfectly imperfect.

The KonstruktTM Lunar Series is inspired by the aesthetically fascinating features of the moon. Each faux finish is striking but not overwhelming to the eye. The minimalist appeal and sleek ambiance add a flair of sophistication to any living space. Its simplicity and versatility render it as a perfect backdrop to highlight centerpieces. It is subtle but impactful – luxurious without being indulgent.

SURFACE PREPARATION:

•     Remove honeycomb and loose concrete.

•     Check and repair all relevant surface defects (i.e., cracks, gaps) by corrective civil works, water proof as necessary.

•     Make sure that the surface to be coated is clean, dry and that good weather persists prior to application.

MIXING AND APPLICATION PROCEDURE:

1.   Please follow mixing procedures of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render below:

•     Stir Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render using mixing device to attain consistency.

•     Transfer mixture to another clean bucket, mix it with Portland cement (1:1 ratio) using a mixing device until desirable consistency is attained.

2.   Please follow application procedures of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render below:

•     Using a steel trowel, apply the mixture thinly on the surface by pressing the edge of the trowel firmly on the concrete until all areas are covered.

•     Stick the fiber mesh over the applied Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render to have reinforcing membrane, sandwich the fiber mesh by re-application of the mixture of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render not less than 3mm and not more than 5mm thickness.

•     For stucco finish (Kairo finish), apply Konstrukt™ Permaplast™ K-231 Deco Render over Konstrukt™ Permaplast™ K-202 High Performance Acrylic Render after seven (7) days depending on weather condition.

•     No need to neutralize the surface.

3.   Apply Konstrukt™ Permaplast™ K-231 Deco Render to produce desired stucco finish by the following procedures below:

•     Stir Konstrukt™ Permaplast™ K-231 Deco Render using mixing device to attain consistency. Please note that you may only add 5% of clean water for thinning.

•     Using a plastic trowel, apply the mixture on the surface by pressing the edge of the trowel firmly until all areas are covered.

•     Spread even the applied Konstrukt™ Permaplast™ K-231 Deco Render using plastic trowel to achieve desired stucco texture.

•     Let it dry for at least 30 minutes before applying the second coat (if necessary).

•     No need to neutralize the surface. Allow at least seven (7) days curing time prior to application of paint.

4.   Painting

Apply at least two (2) coats of any colors factory-premixed of BOYSEN® PermacoatTM Latex B-713 Matte Finish (or any BOYSEN® water-based paints)

DESCRIPTION: Lunar Series

From afar, the moon gleams exquisitely at sundown. It envelopes the night with mysterious aura, silently luring a curious spectator in. Its lulling presence pacifies the hardness of the day. Utterly hypnotizing, one experiences a sense of calm and completeness. Dazed eyes can’t simply look away from it. Further zoom into its surface, it boasts varying textures – tiny and large craters, dark stretches, and rough impacts. Bombarded with asteroids and meteorites colliding with the lunar surface, it comes out beautifully undone. The moon is perfectly imperfect.

The KonstruktTM Lunar Series is inspired by the aesthetically fascinating features of the moon. Each faux finish is striking but not overwhelming to the eye. The minimalist appeal and sleek ambiance add a flair of sophistication to any living space. Its simplicity and versatility render it as a perfect backdrop to highlight centerpieces. It is subtle but impactful – luxurious without being indulgent.

SURFACE PREPARATION:

•     Remove honeycomb and loose concrete.

•     Check and repair all relevant surface defects (i.e., cracks, gaps) by corrective civil works, water proof as necessary.

•     Make sure that the surface to be coated is clean, dry and that good weather persists prior to application.

MIXING AND APPLICATION PROCEDURE:

1.   Please follow mixing procedures of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render below:

•     Stir Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render using mixing device to attain consistency.

•     Transfer mixture to another clean bucket, mix it with Portland cement (1:1 ratio) using a mixing device until desirable consistency is attained.

2.   Please follow application procedures of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render below:

•     Using a steel trowel, apply the mixture thinly on the surface by pressing the edge of the trowel firmly on the concrete until all areas are covered.

•     Stick the fiber mesh over the applied Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render to have reinforcing membrane, sandwich the fiber mesh by re-application of the mixture of Konstrukt™ Permaplast™ K–202 High Performance Acrylic Render not less than 3mm and not more than 5mm thickness.

•     For stucco finish (Kairo finish), apply Konstrukt™ Permaplast™ K-231 Deco Render over Konstrukt™ Permaplast™ K-202 High Performance Acrylic Render after seven (7) days depending on weather condition.

•     No need to neutralize the surface.

3.   Apply Konstrukt™ Permaplast™ K-231 Deco Render to produce desired stucco finish by the following procedures below:

•     Stir Konstrukt™ Permaplast™ K-231 Deco Render using mixing device to attain consistency. Please note that you may only add 5% of clean water for thinning.

•     Using a plastic trowel, apply the mixture on the surface by pressing the edge of the trowel firmly until all areas are covered.

•     Spread even the applied Konstrukt™ Permaplast™ K-231 Deco Render using plastic trowel to achieve desired stucco texture.

•     Let it dry for at least 30 minutes before applying the second coat (if necessary).

•     No need to neutralize the surface. Allow at least seven (7) days curing time prior to application of paint.

4.   Painting

Apply at least two (2) coats of any colors factory-premixed of BOYSEN® PermacoatTM Latex B-713 Matte Finish (or any BOYSEN® water-based paints)

Choose Color

For technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.

Konstrukt Lunar Series Koastal
 
Konstrukt Lunar Series Koastal