|
DESCRIPTION: Nation™ Fast Dry Enamel is an economy-line alkyd-type paint that is both durable and fast drying. It is especially formulated to beautify and protect wood and metal surfaces.
PRINCIPAL USES: For interior and exterior wood and metal surfaces
FINISH: Gloss
DRY TIME:
Touch: 5 hours
Recoat: 8 - 12 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Oil Tinting Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-2319 Hansa Yellow and B-2315 Bulletin Red are for interior painting only.
THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of Nation™ alkyd enamel products.
CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340
PACKAGING: 1 Liter, and 4-Liters (16-Liters also available for White)
APPLICATION: By brush or roller
AVAILABLE COLORS:
NS-950 White
NS-951 Black
NS-953 Sunshine Yellow
NS-954 Ivory
NS-956 Tropical Green
NS-957 French Blue
NS-959 Walnut
NS-964 Crystal Blue
NS-965 Maple
NS-969 Crystal Green
NS-983 Caramel Brown
|
|
DESCRIPTION: Nation™ Fast Dry Enamel is an economy-line alkyd-type paint that is both durable and fast drying. It is especially formulated to beautify and protect wood and metal surfaces.
PRINCIPAL USES: For interior and exterior wood and metal surfaces
FINISH: Gloss
DRY TIME:
Touch: 5 hours
Recoat: 8 - 12 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Will accept BOYSEN® Oil Tinting Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-2319 Hansa Yellow and B-2315 Bulletin Red are for interior painting only.
THINNING SOLVENT: Thin with not more than 1-Liter of BOYSEN® Paint Thinner B-0340 per 4-Liter can of Nation™ alkyd enamel products.
CLEAN-UP SOLVENT: BOYSEN® Paint Thinner B-0340
PACKAGING: 1 Liter, and 4-Liters (16-Liters also available for White)
APPLICATION: By brush or roller
AVAILABLE COLORS:
NS-950 White
NS-951 Black
NS-953 Sunshine Yellow
NS-954 Ivory
NS-956 Tropical Green
NS-957 French Blue
NS-959 Walnut
NS-964 Crystal Blue
NS-965 Maple
NS-969 Crystal Green
NS-983 Caramel Brown
|
|
SURFACE PREPARATION:
Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.
For repainting, scrape off all loose, scaling, flaking, and peeling paint as necessary. Make sure the surface is clean, dry, and good weather persists prior to painting. Prime with Nation™ Flatwall Enamel White NS-800 before recoating.
Metal Surfaces
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.
Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.
For recoating pre-painted galvanized surfaces in good condition, sand lightly then wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.
For corroded galvanized surfaces, remove rust by wire brushing and use BOYSEN® Metal Etching Solution B-71. Let it stay for 10 - 15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.
PAINTING SCHEDULE:
Wooden Surfaces
1st coat: Nation™ Flatwall Enamel NS-800
Putty: BOYSEN® Plasolux Glazing Putty B-311
2nd & 3rd coat: Nation™ Fast Dry Enamel (any desired color)
Metal Surfaces
1st coat: Nation™ Red Oxide Metal Primer NS-610
2nd & 3rd Coat: Nation™ Fast Dry Enamel (any desired color)
|
